Chengdu CQMEC Machinery & Equipment Co., Ltd
Chengdu Cqmec Machinery And Equipment Co.,Ltd.(Omecfire)
Add to Cart
2.5'' EPDM Lined Double Jacket Firefighting Hose For Fire Fighting
This EPDM lined fire hose has double jacket, the jacket is made of polyester silk,in plain or twill weave.The lining is EPDM. This is liquid adhension between jacket and rubber lining.
Specification of EPDM Lined Fire Hose
| Inner Diameter | W.P.(Mpa) | B.P.(Mpa) | |
| Item | Nominal size (mm) | ||
| 1’’ | 25 | 0.8-4.0 | 2.4-12.0 |
| 1.5’’ | 38 | 0.8-4.0 | 2.4-12.0 |
| 2’’ | 51 | 0.8-4.0 | 2.4-12.0 |
| 2.5’’ | 63.5 | 0.8-4.0 | 2.4-12.0 |
| 3’’ | 76 | 0.8-4.0 | 2.4-12.0 |
| 4’’ | 102 | 0.6-2.5 | 1.8-7.5 |
| 5’’ | 127 | 0.6-2.5 | 1.8-7.5 |
| 6’’ | 152 | 0.6-2.5 | 1.8-7.5 |
Precautions and Maintenance of Fire Hose:
1. In severe winter, when water supply needs to be suspended on the fire site, in order to prevent the water belt from freezing, the water pump needs to run slowly to maintain a small water output.
2. cleaning and maintenance.
The water belt conveying foam must be carefully washed to protect the adhesive layer. In order to remove the grease on the hose, you can wash it with warm water or soap. For the frozen hose, first use it to melt, and then clean it and dry it. The hose that is not dried should not be stored in rolls.
Other Recommended Products
